Instruction Manual

7 of 7

Programming Instructions

STEP 3: ADVANCED PROGRAMMING (CONTINUED)

MOTOR SHIELDING

The mode allows a motor’s wireless radio signal to become temporarily disabled to save the battery life.

DISABLE

SIGNAL:

Setup is

complete

Motor

beeps

HOLD

until motor jogs 2X

then RELEASE

ENABLE

SIGNAL:

Setup is

complete

Motor will

automatically

move to previously

assigned limit

HOLD

until motor jogs 2X

then RELEASE

If no limits are set, the motor will not move when enabled.

OPERATING SHADE AT MOTOR HEAD

This mode allows you to operate the shade in the event that the remote goes missing or is lost.

Note: pressing the motor setting button while the

shade is moving can also stop the motor.

HOLD

until motor jogs 2X

then RELEASE

SWITCHING DIRECTION AT MOTOR HEAD

The change of direction can be done after limits have been set.

Setup is

complete

Motor

beeps

HOLD

until motor jogs 3X

then RELEASE

Test shade: Move shade up

and down to ensure that the

direction has been changed.