OW N E R ’ S M A N UA L Sun Dolphin Sportsman 1790 Sun Dolphin Drive Muskegon, Michigan 49444 phone 231-733-2725 fax 231-739-4502 email klsales@klindustries.com website www.klindustries.
Congratulations on the recent purchase of your new fishing boat! You have purchased a boat from one of the nations leading manufacturers of small boats. Your boat represents years of commitment to product design, excellence in engineering and quality in manufacturing. With proper care and maintenance your boat should last for many years to come. Please call our helpful and knowledgeable Customer Support Department if you have any questions or concerns.
Paperwork Warranty Registration Card To properly register your boat with KL Industries for warranty validation please fill out the warranty registration form online at www.klindustries.com. Please review our full warranty statement. If you are unable to register your boat online please contact our Customer Support Department at 231-733-2725. The serial number can be found on the outside of the hull in the back right corner just under the rubrail. See Photo #2.
these limits. • Make sure your drain plug is installed and secure. See Photo #3. • Make sure all passengers are wearing Personal Flotation Devices. • Check and tighten if necessary all motor mount clamps. TRANSPORTING Photo #3 Drain Plug Location • The Sportsman is designed to slide into the box of a pick up truck. Either remove the seats or secure them so they don’t blow out. • If the boat will be trailered a simple flat bed utility trailer works better than a conventional boat trailer.
1. Relieve the pressure that caused the dent or distortion by supporting the boat differently or removing gear or the motor etc. 2. Place the boat in the warm sun. Usually the south side of a building is the warmest spot. As the boat warms up usually (but not always) the boat will return to its original molded shape. This may take a few hours or a couple of weeks depending upon outside temperatures and the degree of distortion. STORAGE • Winter can be very hard on boats.
between the deck and hull due to rain, waves and condensation. This is normal, not a defect, and should be drained after each use. Do not return to the retailer. The drain plug is located in the bow of the boat on the right side above the rubrail. See Photo #3. Please be sure to secure the drain plug after draining. Remove battery before draining your boat. 4. Can I trailer my boat with the motor on? Outboard motors on small boats should always be removed when trailing. 5.
Sportsman Features ALSO FEATURES: • Meets US Coast Guard safety standards Built-in rear motor mount Recessed drink and tackle holders Formed battery location Protective vinyl rubrail • Closed cell polystyrene foam flotation Adjustable and removable swivel seats Convenient handrails Rugged UV-stabilized Fortiflex® High Density Polyethylene deck and hull • Carrying handles Built-in front motor mount Mooring cleats Durable seat supports Prewired for electric trolling motor Specifications Length 102”
WARRANTY Please call us at 231-733-2725 if you have questions or a problem with your boat. Do not return the boat to the retailer. KL Industries, Inc. warrants to the original owner of any KL Industries boat. Any part of the boat that is defective in material or workmanship will be repaired, without charge, at the purchasers’ local dealer or at KL Industries. For personal use, this warranty shall apply for a period of two years on the deck and hull and two years on parts from the date of retail sale.
