Replacement Part List

STORAGE
• Remove the boat from the water. Leaving the boat in the water for any longer than a few days will promote algae growth on the hull.
• Winter can be very hard on boats. We advise cleaning and coating electrical fittings with CRC 56 or battery terminal protectant prior
to storage. For best results we suggest a mooring cover, which prevents water and debris from accumulating. Custom fit boat covers
are available from KL Outdoor. Please call our Customer Support Department or order online at www.sundolphin.com. If possible store
your boat in a garage or barn.
• Make sure all water is drained from between the deck and hull.
• When storing your boat, open the drain plug and tilt the bow up for the Pro 102 and Pro 120 models to ensure proper drainage.
Tilt the Pro 94 stern up because the drain is in the bow of the boat.
• Don’t allow water to accumulate between the deck and hull and freeze. Freezing damages the flotation foam.
• Close the cap on the bow and/or stern light sockets on the Pro 102 and Pro 120 models.
• Remove all seats, fuel tanks, batteries and other accessories.
• Don’t fill the boat with gear.
• Release the tension from winch and tie down straps.
• Don’t store the boat on sawhorses.
OPTIONAL ACCESSORIES
Order online at www.sundolphin.com.