Instructions / Assembly

Step 2
Turn the Chair Base(C) upside down on a clean, non-marring surface.Extend the Footrest to Open.
Carefully take out Inner Box stowed as shown above.Open it,and You will find Wings(B1)&(B2).
Stow the Footrest to Original Position.
Step 3
Keep the Chair Base(C) in the same position, first .install the Front Leg(D)at the bottom of the Chair by
placing one Plastic Washer(
①
) on the threaded stem,Then insert threaded stem into the threaded
mounting position at the corner of the chair.
Tighten by turning the Leg Clockwise,DO NOT OVER TIGHT
Repeat the same step to install the remaining another Front Legs(D).
Take care of the shape of the Legs and ensure they are in the correct positon.
Note:The use of the Plastic Washe are OPTIONAL and are especially useful to help alleviate
slight wobbleness.Some legs may need more than one Plastic Washe whilst some legs may not
need any.
Page 5 OF 7