User's Manual

safety.
Some small articles (such as T-Flash
card, etc.) should be placed out of
children reach, to prevent children
swallowing or other hazard.
Please backup the important
information or keep a written record,
to prevent its loss.
When sending an emergency call,
please ensure your mobile phone power
on and in a service area, inform your
position, without permission, please
don't end this call.
9
Ⅱ. Before Use
1. Install and Unload SIM Card
1.1 About SIM Card
Before using the phone, you must insert valid SIM (Subscriber Identity Module) card in the
phone.
SIM card provided by network supplier.
All the information related to network connection are recorded in the chip of SIM card, also
the
names, telephone numbers and SMS that storing in the name card holder of SIM card. You
can take out SIM card from your phone, and use it in any GSM mobile phone (new mobile
phone can read SIM card automatically).
In order to avoid losing or damaging the information saves in SIM card, please don’t touch
the
metal contact surface, and place SIM card in the place that away from electricity and
magnetic force. Once SIM card is damaged, you can’t use the phone normally.
Prompt: Please make sure to power off the phone before taking out SIM card. It is
absolutely
forbidden to insert or take out SIM card with external power supply; otherwise it may
damage SIM
card and the phone.
1.2 Insert and Unload SIM Card
Metal contact surface of SIM card is easily scratched. You must take out SIM card carefully
before the assembly.
Power off the phone, remove the rear cover, battery or other external power supply.
Make the end of SIM card without cutting angle inside and aim at the card slot of the phone
and metal surface of SIM card face downward, then insert SIM card to the card slot of the
phone, the other SIM card is also inserted in this way.
When taking out SIM card, directly pull it outward and then can take out SIM card.
Prompt: Without special explanation inserting two SIM cards are defaulted in the manual.