Product Manual

www.SumpAlarm.com
Page 2 of 4 SW-120V-3L-R0315.doc
Should you have questions at any time on the installation or application of your Sump Watch unit, please contact us at
[e-mail].
LOCATING THE CONTROL PANEL
The control panel should be mounted in a convenient location. Cable lengths need to be considered, and extra cable can be stowed
above or below the water line. The location should allow “line-of-sight” visibility of the indicating lights from the desired vantage
point. The surface on which it is mounted should not be subject to substantial vibrations. Follow the National Electrical Code and all
local and state or provincial codes.
MOUNTING THE CONTROL PANEL
The control panel should be securely mounted to a wall or secure vertical structure. The control panel has four corner-located
mounting holes, which can be accessed by removing the face plate.
Note that the four weather proof mounting holes can be accessed by opening the head unit and are directly adjacent to the posts
for mounting the face of the head unit.