INSTALLATION INSTRUCTIONS BUILT-IN GAS AND ELECTRIC RECESSED WALL OVENS 700 SERIES PIPING AND INSTALLATION NOTE: DO NOT INSTALL ELECTRICAL CONNECTION BELOW WORK COUNTER CABINET CUTOUT CABINET SPACER EIN, 4) RED 26" SUGGESTED 70 FLOOR cms £1870 FRONT So OF CABINET FROM INSIDE EDGE J ~ OF CABINET CUTOUT Ty ! NS HOUSE PIPING, FLEX & CONNECTOR OR IRON st PIPE AND SHUT-OFF AB RED PER DOGE NIPPLE LENGTH AS NEEDED (HOUSE PIPING) APPLIANCE SHUT-OFF VALVE AnD REGULATOR SAYS, ~ MALE ADAPTER ~ UT NET ~ HOUSE FIRING ~
GAS RECESSED WALL OVEN Sticks the oven unit into the cabinet recess as shown in the diagram. Secure the oven unit to the cabinet with wood screws. Be sure to use the cabinet spacer with the wood screw as a “washer” between the wood cabinet and the oven front frame. The recess in which the oven is installed shall be constructed so as fo provide a complete closure around the recessed portion of the unit and any openings around gas and electrical service outlets MUST be closed al time of installation.
WIRING DIAGRAM FOR GAS SURFACE UNITS AND WALL OVENS TOP BURNER IGNITION SWITCHES REAR FRONT IGNITION IGNITION IGNITION MODULE LEAD LEAD OVEN STAT BK B.
WIRING DIAGRAM FOR ELECTRIC RANGES GROUND NOTICE WARNING: FRAME GROUNDED TO NEUTRAL OF [Ca] “\ APPLIANCE THROUGH A LINK. IF USED IN 1.34 8 MOBILE HOME OR IF LEGAL CODES TES ws —_ NOT PERMIT GROUNDING THROUGH THE NEUTRAL, DISCONNECT THE LINK FROM IN MANUAL POTION THE NEUTRAL AND USE GROUNDING si] TERMINAL OR LEAD TO GROUND UNIT ACCORDANCE WITH LEGAL CODES. CONNECT NEUTRAL TERMINAL OR LEAD CLOCK WITH TIMER TO BRANCH CIRCUIT NEUTRAL IN USUAL MANNER.
