Felix Storch, Inc. SUMMIT Appliance 770 Garrison Avenue Bronx, NY 10474 USE AND CARE GUIDE Induction Cooktop, Model SINC2B120 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE TOP OR BOTTOM COVER. NO USER-SERVICEABLE PARTS INSIDE. INSTALLATION, REPAIR, AND REMOVAL SHOULD BE DONE BY AUTHORIZED SERVICE PERSONNEL ONLY. Before installation, record the model and serial number as found on the back of your cooktop.
Contents Your SUMMIT Induction Cooktop ........................................................ 1 About Induction Cooking ....................................................................... 1 Important Safety Instructions .......................................................... 2 - 4 Installation ........................................................................................5 - 7 Electrical Connection ..............................................................................
IMPORTANT SAFETY INSTRUCTIONS Keep these instructions handy for future use. If lost, this manual is available from our website at www.summitappliance.com Read all instructions carefully before installation and operation of the appliance. Failure to follow these warnings could result in a fire or explosion that causes property damage, personal injury or death.
Condition of Unit Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment. Do Not Cook on Broken Cook-Top – If cook-top should break, cleaning solutions and spillovers may penetrate the broken cook-top and create a risk of electric shock.
Use proper cookware size - This appliance is equipped with two cooking zones of different sizes. Choose cookware with a flat bottom large enough to cover the unit heating surface. The use of undersized cookware will expose a portion of the heating surface where direct contact may be made and cause serious injury. Compatible cookware will improve efficiency.
Installation USE ---- COUNTERTOP Please find 4 feet in the packaging, you can screw them into the bottom of the unit, then the unit can be used directly on the countertop. take out screw before installing take out screw before installing Parts take out screw before installing take out screw before installing USE ---- DROP-IN This appliance is not user serviceable. Installation must be completed by a qualified technician. Cooktop Installation 1. Cut an opening in the counter surface.
Ensure that the underside of the induction cooktop is well ventilated and the air inlet is not blocked. The distance between the cooktop and any cupboard above the appliance should be at least 30 inches. 2. After cutting the opening, remove any shavings or other loose material that may interfere with the appliance’s operation. 3. IMPORTANT NOTE: Do not seal the cooktop to the countertop. It must be removed if service is necessary. 4.
Installation MODEL SINC2B120 120V 60Hz 1800W 13 3/8" (340) 20 1/2" (520) Min 1 1/2 "(38) Edge of Cutout to Rear Edge of Countertop Min 2 "(51) OF CABINET SPACE (BOTH SIDES) 20 1/2" (520) OVERALL DEPTH Min 19 7/8"(504) Max 20 1/16"(510) Min 12 3/8"(314) Max 12 9/16"(320) 1 1/2"(38) Min.
Electrical Connection Note: This appliance must be installed in accordance with National Electrical Codes, as well as all state, municipal and local codes. The correct voltage, frequency, and amperage must be supplied to the appliance from a dedicated grounded circuit which is protected by a correctly sized circuit breaker or time delay fuse. Appliance voltage, frequency, and amperage ratings are listed on the product rating plate. For model SINC2B120, plug the cord into a grounded outlet.
How to Use Your Cooktop Getting Started Before operating your induction cooktop, clean the surface (see CLEANING YOUR COOKTOP for instructions) to remove any foreign substances that may remain from packaging, shipping and installation.
Activating the Child Safety Lock during cooktop use: Child Lock prevents activation of any sensor key, except for the “ON/OFF” key and the “Lock” key. A. Manual: Press the Lock key to activate the function. The unit will make a “beep” sound and the indicator light will turn on above the Lock key. The controls are now locked. B. Automatic: The induction cooktop will automatically enter into Lock mode if any key is not pressed within 5 minutes.
Heating Place cookware on the cooktop. Please select from the Power Setting to begin cooking. Power Setting Mode: This function cooks at power ( wattage) settings. When the unit is in the Readiness mode, if you would like to turn on desired element, press “+” key once, the specific digital display will show “0” and be blinking. Press “+” key secondly within 60s to enter into level 4 directly, then you can press “+” or “-“key to select desired power level.
Set Timer mode The automatic timer settings range from 1 minute to 99 minutes. (Note: there is no “seconds” and “hours” display, only minutes.) When the unit is in the cooking mode, press the “Timer” key. The “Timer” indicator light is lit up, indicating the cooktop has entered Set Timer Mode; the digital display reads “00” and blinking. Press “+” or “-” key to set the desired number, then press “Timer” key to complete setting.
Compatible Cookware The quality of your cooking is dependent on the cookware you. use. Because induction cooking requires a magnetic vessel for heating, only certain materials can be used on your cooktop. Proper Cookware Flat-bottom pots or pans with diameter from 12 to 26 cm (4.7 to 10.
Cleaning Your Cooktop After each use, unplug or turn off the power and let your unit cool down completely. When it is cool to the touch, apply approximately 1 teaspoon (5 ml) of nonabrasive cleaner to the surface of the ceramic glass with a lightly dampened cloth. Use a second cloth to remove any remaining cleaner residue. Wipe dry with a dry cloth.
Troubleshooting Guide If you encounter the following problems while using your cooktop, check the guide below to see if you can correct the problem yourself before calling for assistance: Problem Possible Cause Cooktop does not work Cooktop controls are locked Make sure Lock mode is turned off Power outage Check house lights to confirm power outage No cookware or improper cookware placement on the cooking zone Cooktop does not heat Solutions Incorrect cookware size for the selected cooking zone M
When two heating zones are turned on, will create a total max 8 setting See POWER SHARING The fans keep running for one minute after the unit has been switched off The electronics are cooling down This is a normal occurrence “E0 ” appears in the digital display IGBT overheating Turn off unit to allow IGBT to cool.
Warranty FELIX STORCH, INC. 770 Garrison Avenue Bronx, NY 10474 718-893-3900 SUMMIT LIMITED WARRANTY SUMMIT Appliances warrants this product to be free from defects in materials and workmanship for a period of one year from the date of original purchase or delivery. Any parts determined to be defective will be replaced by SUMMIT at no charge to you. Plastic parts, liners, and outer cabinets are warranted to be manufactured to commercially acceptable standards and free from defects at the time of delivery.
