Owners Manual
7
OPERATING YOUR APPLIANCE
It is recommended you install the appliance in a place where the ambient temperature is between
65ºF and 90ºF (18Cº to 32ºC). If the ambient temperature is above or below the recommended
temperatures, the performance of the unit may be affected. For example, placing your unit in
extremely cold or hot conditions may cause interior temperatures to fluctuate.
When the unit is first turned on, allow it to operate for about an hour to cool the interior before
placing items inside.
Control Panel
The control panel is located on the back, interior wall, in the upper right-hand corner. Under normal
operation, the LED display shows the internal temperature of the cabinet. If you have any other
questions regarding the operation of this unit, please call our Customer Service Department at 1-
800-932-4267 (9:00AM to 5:00PM ET).
Adjusting the Set Temperature
In standby mode, press the key for three seconds. St will display on the control panel. Press the
key again to display the current set temperature. Press the or to adjust the set
temperature. The temperature can be set between 0C to 10C. Press the key, then the key
(or do not touch any key for 30 seconds) to set the temperature.
Description of Keys
Keys
Function
Enter the status of the parameter setting
Switch between menu and parameter
Adjust menu and parameters
Open/Close light (only valid for models with light control)
Adjust menu and parameters
Press for 10 seconds to execute parameter one-key
recovery
Exit from parameter setting status
Exit from one-key recovery status
Force to start defrost