Use & Care

4
Moving and Installing the Appliance
a. When carrying the cooler, keep it vertical. The angle of inclination between the sides of the
cooler and the vertical should be less than 40
ᵒ
, otherwise the compressor will be affected
and disrupt normal operation.
b. After unpacking the cooler, remove the packing materials and place the cooler on a level
and sturdy floor near a power socket.
c. Be sure to leave at least 4” of clearance at the back and sides of the cooler for ventilation
and leave a space with an open angle of 160
ᵒ
for the door.
d. Keep the cooler away from heat sources and avoid direct sunlight.
e. Never place the cooler in a location where water can reach it or with unusually high
humidity.
f. This appliance is intended for use indoors, such as in shopping centers, restaurants, etc.
Reversing the Door Swing
This appliance has the capability of the door opening from either the left or right side. The unit
is delivered to you with the door opening from the left side. Should you desire to reverse the
opening direction, please follow these illustrations and instructions:
You will need to tilt the fridge backward to access the lower hinge which holds the screws. Do
not tilt more than 45 degrees and do not lay the fridge flat on its side.
Reversing the door：
1. Remove the top plastic hinge cover and set aside
2. Unscrew the 3 screws from the metal bracket and set aside. Carefully remove the door and
place it on a cushioned surface.