Support

Summit Appliance Division · Felix Storch, Inc. · www.summitappliance.com · 718-893-3900 · [e-mail]
Installing the Casters
A screwdriver, casters, and wheels should be packaged with your chest
freezer.
1. Lay the packaging foam your freezer was packed in on the ground, and
gently set your unit on the foam so the bottom of the unit is exposed.
2. Install the wheels on the side of the unit with the with the control panel
(typically the right-hand side).
3. Slide the casters into the slots on the opposite side (typically the left-
hand side).
4. Fix the casters to the freezer with screws.
5. Set the unit upright. CAUTION: You must wait at least 2 hours before
powering the unit on to allow for the refrigerant to settle.