Ice Maker Quick Start

ManualsBrandsSummit ManualsBottom Mount Refrigerators24 Inch Counter Depth Bottom-Freezer Refrigerator with Ice Maker, Meat/Fish Drawer, Holiday Setting, Super Cool, Super Freeze, Bottle Holder, Integrative Ice Box, Crisper Drawer, Open Door Alarm, Fingerprint Resistant Finish, Frost-Free, Wine Rack, Adjust

Summit Appliance, Div. of Felix Storch, Inc. · Bronx, NY 10474 · Tel: 718-893-3900 · Fax: 844-478-8799

QUICK START GUIDE

WATER LINE CONNECTION FOR

INSTALLED (MODULAR) ICEMAKERS

NOTES:

• This manual provides instructions on how to connect a water line to an icemaker already

installed on your Summit refrigerator. Please read the manual carefully and follow the

instructions exactly as described, observing all safety instructions.

• A certain amount of mechanical ability is required to complete the water connection

process.

• You will have to purchase a ¼” OD copper tubing kit. The kit contains all the hardware

necessary to connect your icemaker to the water supply, including the regular valve

(NOTE: valve should only be installed in a cold water supply). You can purchase one at

most hardware or plumbing supply stores.

• DO NOT USE PIERCING-TYPE OR 3/16” SHUT-OFF VALVES. They reduce the flow of water

to the icemaker and are easily clogged.

• CUSTOMER INSTALLATION IS NOT WARRANTED BY THE REFRIGERATOR OR ICEMAKER

MANUFACTURER.

Summary of content (4 pages)

PAGE 1
QUICK START GUIDE WATER LINE CONNECTION FOR INSTALLED (MODULAR) ICEMAKERS NOTES: • This manual provides instructions on how to connect a water line to an icemaker already installed on your Summit refrigerator. Please read the manual carefully and follow the instructions exactly as described, observing all safety instructions. • A certain amount of mechanical ability is required to complete the water connection process. • You will have to purchase a ¼” OD copper tubing kit.
PAGE 2
Forming the copper tubing: Loop the copper tubing coming from the water valve as shown. Position the coiled copper tubing near the center of the unit so that it forms an “accordion-fold” (as shown in the diagram below) for when the refrigerator is moved to and from the wall. 2 Summit Appliance, Div. of Felix Storch, Inc.
PAGE 3
Starting the Icemaker Wash out the ice bucket. Slide it under the icemaker (see diagram below) as far as it will go. The ice bucket will be sitting on top of the freezer shelf. Lower the arm on the icemaker (as shown in the diagram) to its “on” position, and close the freezer door. The icemaker will begin to make ice within 24 hours. NOTE: It usually takes approximately 24 hours for the icemaker to begin producing ice. Once ice is available, you may notice that it has an “off” taste.
PAGE 4
TROUBLESHOOTING Operational Notes: The icemaker water valve contains a flow washer that acts like a pressure regulator to control the water flow. For the icemaker to work properly, the water pressure in your home must be between 20 and 120 pound-per-square-inch (psi). If you encounter problems with your icemaker’s ability to produce ice, call your water utility company and have the water pressure checked.