Use & Care

10
CARE AND MAINTENANCE
Cleaning the Refrigerator
1. Turn the temperature control to Off, unplug the unit and remove the stored items and shelves.
2. Wash the inside surfaces with a solution of warm water and baking soda. The solution should
contain about 2 tablespoons of baking soda to a quart of water.
3. Wash the shelves with a mild detergent solution.
4. Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with
a clean soft cloth.
5. Wring excess water out of the sponge or cloth before cleaning the area of the controls, or any
electrical parts.
CAUTION: Failure to unplug the unit before cleaning or maintenance could result in electrical shock
or personal injury.
Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of your
unit if you minimize the number of times the door is opened. If the power is going to be off for a
longer period of time, you need to take the proper steps to protect the contents.
Vacation Time
• Short vacations: Leave the refrigerator operating during vacations of less than three weeks.
• Long vacations: If the refrigerator will not be used for several months, remove all contents and
unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth,
leave the door open slightly, blocking it open if necessary.
Moving the Unit
1. Remove all items stored in the refrigerator.
2. Securely tape down all loose items inside the unit.
3. Turn the leveling legs up to the base to avoid damage.
4. Tape the door shut.
5. Be sure the unit stays secure in the upright position during transportation. Also, protect the
outside of the unit with a blanket or similar covering.
Energy-Saving Tips
• The unit should be located in the coolest area of the room, away from heat-producing appliances
and out of direct sunlight.
• Let warm items cool to room temperature before placing in the unit. Overloading the unit forces
the compressor to run longer.
• Be sure to wrap items properly and wipe containers dry before placing them in the unit. This cuts
down on frost build-up inside the unit.
• The unit's storage area should not be lined with aluminum foil, wax paper or paper toweling.
Liners interfere with cold air circulation, making the unit less efficient.
• Organize and label stored items to reduce door openings and extended searches. Remove as
much as needed at one time, and close the door as soon as possible.