User's Manual

6
Total Control 2.0
MRX-5
Owner’s Manual
Connecting IR Emitters:
IR emitters are used to communicate to AV devices such as cable boxes, televisions,
blu-ray players and more.
1. Plug IR Emitters into any of the four (4) IR outputs available on the rear of
the MRX-5.
IR Output 4 includes an adjustable sensitivity dial. Turn this dial to the
right to increase the gain and to the left to decrease it.
2. Remove the adhesive covering from the emitter and place it over the IR
receiver of the 3
rd
party device (cable box, television, etc.).
1
2
IR Emitter