User's Manual
5
Total Control 2.0
MRX-5
Owner’s Manual
Installing the MRX-5:
The MRX-5 Advanced Network System Controller can be installed almost anywhere in
the home or business.
Once physically installed, it requires programming by a certified URC integrator in
order to operate local equipment using IP (network), RS-232 (serial), IR (infrared), or
relays. All cables must be connected to their respective ports at the rear of the device.
Network Installation:
1. Connect an Ethernet cable (RJ45) to the rear of the MRX-5 and the onto
an available LAN port of the network’s local router (Luxul preferred).
2. A certied URC integrator is required for this step, congure the MRX-5 to a
DHCP/MAC reservation within the local router.
1
2