User's Guide

3
33
3
The rotary switch is used to select one of the operational modes.
The four (4) LED’s will display the mode currently selected. By
rotating the switch with the provided tool, the LED’s will change
configuration and the operating mode will change accordingly.
For a summary of all the modes and relative LED encoding the
reader should refer to Appendix A.
Figure 2 - Main Panel
Antenna Connector
The left side of the TT-6001 hosts a SMA connector to be used to
connect the UWB antenna module provided (with or without the
antenna extender).
Figure 3 - Antenna Connector