User's Manual

22867 NW Bennett Road, Suite 200
Hillsboro, OR 97124 USA
Phone: [phone] • Fax: [phone]
http://www.FOCUSinfo.com
4 MAGOO Control Software
1. Go to the folder on your desktop and double click the MAGOO.exe application. This
will launch the MAGOO control software. You should see a menu similar to the one
shown below.
2. From this menu you should see one device in the “Connected Devices” box in the
upper right hand corner when the TT2201 is plugged in the USB. The above figure
includes an example of an active USB device in this box. When it is unplugged, the
“Connected Devices” box should be blank.
3. Manually set the Payload Len to 3584.
4. Set the TFC, Data Rate, Power Level as appropriate. Do not adjust other settings.