User's Manual

3
INSTALL THE MiniO
Connect the included Adhesive Bracket to the
Bracket Socket on the dashcam, then afx the
MiniO to the inside surface of your windshield.
For optimal results, place the MiniO near the
rear-view mirror, as shown in the diagram below.
Connect the USB Power Cable to the MiniO and
the USB Car Charger, hiding the cable as seen
above to avoid blocking the driver’s visibility.
The GPS is embedded into the USB Power
Cable. Afx the GPS as seen above, unblocked
and with the adhesive sticker facing upwards.
When the vehicle starts up, the MiniO will start
up as well and automatically begin recording.