User's Manual

Summit User’s Guide – SDC-SSD40L
16
SDC-SSD40L_UsersGuide
© 2011 – 2012 Summit Data Communications, Inc. All rights reserved.
Regulatory
Summit has received a Limited Modular Approval for this radio with the limitation that it must essentially
be mounted on an MSD40L layout in order to have the Summit FCC ID attached to the device.
 Design Implementation Requirements
 Documentation Requirements
Design Implementation Requirements
To ensure regulatory compliance when integrating the SDC-SSD40L (Model # SDC-SSD40L) into a host
device, it is necessary to follow the design implementation requirements listed below in order to have the
Summit certification ID (FCC, IC, and ETSI) applied to the device.
A. Circuit design and components selection considerations
When integrating the SDC-SSD40L (Model # SDC-SSD40L) into customer’s device, please follow the
schematic shown in appendix A. There are several key and critical implementations and components
need to exactly followed to have Summit certification ID (FCC, IC, and ETSI…) applied to the device.
REFDES
DESCRIPTION
MANUFACTURER
MANUFACTURER_PN
C1, C3, C4
CAP CERM 0.10UF 50V X7R 0603
KEMET
C0603C104K5RACTU
C2, C6
CAP CERM 100PF
TDK CORP
445-1281-1-ND
C5, C7
CAP CERM 2.2UF
AVX CORP
478-6212-1-ND
D1
DIODE SS 100V 4.0NS SOD-323F
FAIRCHILD
1N4148WS
D2
PROTECTION DIODE
LITTLEFUSE INC
PGB1010603MR
FB1, FB2
FERRITE CHIP 330 OHM 1200MA
0603
MURATA
BLM18PG331SN1D
J2
CONN RECEPT 60POS 1.5MM SMD
0.5MM
MOLEX
54722-0607-C
J1
CONN RECPT ULTRA-MINI COAX
SMD
HIROSE
U.FL-R-SMT(10)
L1
IND 3.3UH
TDK CORP
VLS3012T-3R3M1R3
R5
RES 0.0 OHM 1/10W 5% 0603 SMD
ROHM
MCR03EZPJ000
R4, R6
RES 0.0 OHM 1/10W 5% 0603 SMD
ROHM
MCR03EZPJ000
R1, R2
RES 4.7K OHM 1/10W 5% 0603 SMD
ROHM
MCR03EZPJ472
R3
RES 10K OHM 1/10W 5% 0603 SMD
ROHM
RC0603JR-0710KL
U1
MODULE XCVR 802.11A/B/G/N
BLUETOOTH SDIO
SUMMIT DATA
SDC-SSD40L
Antenna
CISCO Aironet 2.4GHz Dipole antenna
CISCO
AIR-ANT4941