User guide

40 Summit Audio, Inc.
Tips and Tricks
Add Compression and EQ to a Recorded or Live
Track
TouchPatch Dyn-EQ-DriveBus
Connections
Insert the Dynamics and EQ into the track:
Plug the output of the track into the Dynamics input.1.
Plug the main output from the DriveBus back into the track.2.
Use the ECS-410 Everest as 4 totally Independent
Processors
TouchPatch No Route
Connections
Plug a microphone into the preamp in.1.
Connect the Preamp output to your recorder.2.
Plug a line into the EQ input.3.
Run the EQ output back into your recorder.4.
Plug a line into the Dynamics input.5.
Run the Dynamics output back into your recorder.6.
Plug a line into the DriveBus input.7.
Run the DriveBus output back into your recorder. 8.
EACH section is totally independent and can be used for 4
different processes simultaneously.