Use and Care Manual

14
NOTE: Pressing thePOWER key once can switch off the audible alarm when the alarm is on.
LIGHT
Turn the interior light on and off with this switch.
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
Indicator Light
The indicator light is the decimal pointlocated at the right lower corner of the display. The indicator
light will be on when a multi-key function is selected. To perform a multi-key function, press and
hold the first key, then press the second key for at least 5 seconds and then release both keys.
ºF/ºCSelector
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature
from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHTkey for 5
seconds.
Setting the Temperature Control
 You can set the temperature by touching the UP and DOWN symbols. When youpush the two
buttons at the same time, the LED readout will show the original temperature set previously.
(The temperature preset at the factory is 54°F or 12°C.)
 The temperature you are setting will increase byone degreeeach time you touch theUp symbol,
and will decrease byone degreeeach time you touch theDOWNsymbol.
 The range of the temperature control is from 41°F to 72°F.
 To view the set temperature at any time, touch the UP or DOWN symbol. The set temperature
will flash in the display window for 5 seconds. After 5 seconds, the temperature inside the unit
will reappear in the display window.
CONTROL PANEL for SWC1875B/SWC1966
ON/OFF Power
To turn the appliance off, pressand hold the key for 5 seconds until temperature display goes
out. To turn the appliance on, pressand hold the key for 1 second until temperature display lights
up.
NOTE: Pressing thePOWER key once can switch off the audible alarm when the alarm is on.
LIGHT
Turn the interior light on and off with this switch.