Owners Manual

Replacing Battery for Electrical Igniter:

1. Remove the igniter cap by turning clockwise;

2. Replace the battery;

3. When installing new battery, ensure it is installed with

the proper polarity;

4. Put on the igniter cap back by turning

counterclockwise.

WARNING:

1. To protect against electric shock, do not immerse cord or plugs in water or other liquid.

2. Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on

or taking off parts.

3. Do not operate

any outdoor cooking gas appliance with a damaged cord, plug, or after the

appliance malfunctions or has been damaged in any manner. Contact the manufacturer for

repair.

4. Do not let the cord hang over the edge of a table or touch hot surfaces.

5. Do not use an outdoor cooking gas appliance for purposes other than intended.

6. When connecting, first connect plug to the outdoor cooking gas appliance then plug

appliance into the outlet.

7. Use only a Ground Fault Interrupter (GFI)

protected circuit with this outdoor cooking gas

appliance.

8. Never remove the grounding plug or use with a two-prong adaptor.

9. Use only extension cords with a three-prong grounding plug, rated for the power of the

equipment, and approved for outdoor use with a W-A marking.

OVEN DOOR CLEANING

1. Loosen the M4*10 screw * 4

pcs that fix the oven door and th

take the oven door apart from t

oven.