Owners Manual

13
11. First, insert the door lower axis
into the hole in the base panel.
Next, push down the door uppe
r
spring axis and let go of the spring
when it is pointed to the hole in t
he
horizontal beam. (Note: You may
need to add 1 or 2 washers
18*6.4*1 on the bottom pin so
the door will close evenly)
ALMOST FINISHED!!
12. Put the oven assembly on t
he
stand-top panel. Use screw
M6*12×4 pcs to fasten the oven
onto the stand. (Note: These
screws can be tightened at this
time)