Owners Manual

10
3. Use screw M6*12 ×2 pcs to fix
the left side panel onto the base
panel of the stand. (Note: The
panel should have the “small
holes at the top” to the front of
the cart assembly)
4. Use screw M3*12 ×2 pcs and
nut M3×2 pcs to attach the door
magnet onto the right side pan
el.
(Note: Please attach the magnet
BEFORE you put the right side
panel on. Check to verify that
the magnet points to the FRONT
of the cart. This holds the door
closed)
5. Use screw M6*12 ×2 pcs to fix
the right side panel onto the bas
e
panel of the stand. (Note: The
panel should have the “small
holes at the top” to the front of
the cart assembly. The Right
side panel also has the door
magnet)