Owners Manual

39
2. Loosen the M4*10 screw * 7
pcs that fix the door exterior a
nd
interior, and then loosen the
M4*10 screw * 4 pcs that fix the
door hinge. Then loosen the
shoulder screw that attaches the
door handle.
3. Use spanner 19# to loosen the
nut that fix the temperature gauge
.
And then you can completely
separate the oven door exterior
and interior so as to do the
cleaning.
4. After cleaning, you need to
re-assemble the oven door. Put
the door interior onto the exterio
r
and make every screw hole in
line
with each other. Use M4*10 screw
* 7 pcs to fix the door interior a
nd
exterior. And then use shoulder
screw to fix the handle onto the
door. Finally, use M4*10 screw * 4
pcs to fix the hinge onto the doo
r.