Manual

12
8. Use screw M4*10×4 pcs to fix
the stand door horizontal beam
between the two side panels.
(Note: Please fasten the upper
two screws first, and then the
lower two screws.)
9. Use screw M4*10×4 pcs
to fix the stand top panel on
the top of the two side
panels and back panel.
(Note: These screws can
be tightened at this time)
10. Use screw M5*10×8
pcs to attach triangle×2 pcs
on the bottom of the base
panel, leaning against the
two side panels. (Note:
These screws can be
tightened at this time)