User guide

SECTION 2 - ASSEMBLY
2-2
GENERAL SAFETY PRACTICES
YOU ARE RESPONSIBLE
for the safe assembly of the
machine.
DO NOT ALLOW CHILDREN
or other unauthorized persons
within the assembly area.
WEAR PERSONAL
PROTECTIVE EQUIPMENT
which includes a hard hat,
eye protection, work gloves
and steel toed boots with slip
resistant soles.
DO NOT MODIFY the equipment
or substitute parts in any way.
Unauthorized modication may
impair the function and/or safety
of the machine.
USE SUITABLE LIFTING
DEVICE for components which
could cause personal injury.
BLOCK UP ANY RAISED PART
of the machine. Be sure machine
is stable after blocking.
ALWAYS INSPECT LIFTING
CHAINS AND SLINGS for
damage or wear.
BE SURE LIFTING DEVICE
IS RATED TO HANDLE THE
WEIGHT.*
STOP ENGINE, place all
controls in neutral, set parking
brake, remove ignition key and
wait for all moving parts to stop
before servicing or adjusting.
ALWAYS make sure Land Roller
is lowered into eld position, it
is blocked to prevent movement
and that pressure is relieved
from hydraulic circuits before
servicing.
USE EXTREME CARE when
assembling, servicing or
adjusting.
*APPROXIMATE WEIGHTS OF COMPONENTS
PN DESCRIPTION WEIGHT (LB)
8P6000 HITCH 1780
8P6030 CENTER SECTION 3950
8P6115 WING LEFT AND RIGHT 1166
PN DESCRIPTION WEIGHT (LB)
8P4215 ROLLER, 15’ 4285
8P8630 BOX HARDWARE PARTS 1250