Instruction Manual

INTRODUCTION
This manual provides information about Safety, Assembly, Operation and Parts for the Summers Culti-Harrow,
Superharrow and 3-Rank Superweeder featuring the Summers 16 and 20 Ft. Hitch.
Please refer to these sections before assembling or operating your machine.
Reference to “right” and “left” in this book is determined when the machine is viewed from the rear.
It is the policy of the company to improve its products whenever possible and practical to do so. We reserve the right to
make changes or improvements in the design or construction of parts any time without incurring obligations to install such
changes on products previously delivered.
Summers Mfg. Co., Inc. strongly recommends that each Operator READ and UNDERSTAND the Operator’s Manual
before using the machine. In addition, this Operator’s Manual should be reviewed at least ANNUALLY thereafter.
Parts are referenced in each drawing with the Summers Manufacturing Part Number. Use this Part Number when ordering
replacement parts from your Summers dealer. See back section of manual for description of each Part Number.
SECTION CONTENTS
Section 1: SAFETY: ALL MACHINES
Section 2: ASSEMBLY: CULTI-HARROW
Section 3: ASSEMBLY: SUPERHARROW
Section 4: ASSEMBLY: 3-RANK SUPERWEEDER
Section 5: 16 Ft. HITCH AUTO FOLD
Section 6: 20 Ft. HITCH AUTO FOLD
Section 7: OPERATION – ALL MACHINES
Section 8: PARTS – ALL MACHINES
Section 9: PART NUMBERS and DESCRIPTIONS
OWNER REGISTER
Name _____________________________________ Size __________________________________________
Address __________________________________ Serial Number _________________________________
City ______________________________________
State/Prov. ________________________________ Date Purchased ________________________________
Mail Code_________________________________ Dealer________________________________________
(located on frame)
i