Pre-Delivery/Install Checklist
9
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8AM to 5PM MST, Monday-Friday.
Extended operating days and hours during peak season requirements.
OWNER’S MANUAL
Tools required:
Flat-blade screwdriver (not included)
1. Set up the pool by following all the instructions that came with
the pool. Do not fill water until the Filter Pump is properly
installed. Locate the Outlet and Inlet openings on the pool wall.
4. Snap the Pump on to the Sand Tank Base .
17
1
17
1
Inlet
Outlet
WARNING:
CLIMBING HAZZARD! PLEASE PREVENT CHILDREN FROM CLIMBING ON THE FILTRATION SYSTEM TO GAIN ACCESS TO THE POOL.
Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts.
3. Install the Return Fitting 30 on the Inlet opening of the pool.
31
32
30
26
29
28
27
Outside Pool Wall
Inside Pool Wall
2. Install the Suction Fitting 22 on the Outlet opening of the pool.
24
23
21
22
Outside Pool Wall
Inside Pool Wall
SETUP INSTRUCTIONS