Pre-Delivery/Install Checklist
12
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8AM to 5PM MST, Monday-Friday.
Extended operating days and hours during peak season requirements.
10
2
7
7
PUSH
12. Place the Clamp around the flange of the 6-Port Valve
and Sand Tank .
IMPORTANT: Align the hinge on the Clamp with the ridge
on the flange of the 6-Port Valve .
7
7
2
10
10
13. Close the Clamp by pushing the two jaws as close together
as possible.
7
Cam Handle
Cam Bolt
Cam Handle
14. Pull on the Cam Handle, and insert the Cam Bolt into the opposite
jaw until it locks in place.
15. Hold the Cam Handle with one hand and start turning in
clockwise direction to close the jaws further.
ALIGN
The hinge of Clamp aligned
with the ridge of 6-Port Valve