User Guide

SELECT SELECT
VIEW CAM
BRIGHTNESS
SCAN
ADD CAM
DELETE CAM
VOX ON/OFF
EXIT MENU
TEMP UNITS
Your digital video monitor accepts up to 4 total
cameras.
You can select the one you want to view OR use
the auto-scan mode to cycle through each
camera on an 8-second rotation.
1. Make sure the power is on for the camera
you want to add.
2. Press the MENU/SELECT button to enter
menu screen.
3. Using the DOWN button , scroll to ADD
CAM and press the MENU/SELECT button to
select. Using the UP or DOWN buttons ,
scroll to the camera number you would like to
add and press MENU/SELECT button to
select.
4. Press the SYNC button on the back of the
camera.
Three bars will appear next to the camera
icon to indicate that it is syncing.
THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION.
• STRANGULATION HAZARD - Children have STRANGLED in cords.
Keep this cord out of reach of children (more than 3 feet (0.9 m)
away from the crib). Use enclosed Security Clips to help secure cord
away from baby’s reach. Never use extension cords with AC Adapters. Only use the AC
Adapters provided.
• When an AC Adapter is plugged into an electrical outlet, do not touch the exposed end.
• Test monitor before first use, periodically, and when changing location of the Camera.
• Do not use monitor near water (such as bathtub, sink, etc.).
• Keep monitor away from heat sources (such as stoves, radiators, etc.).
• Make sure there is proper ventilation around all monitor components. Do not place on
sofas, cushions, beds, etc. which may block ventilation.
• This product is not a toy. Do not allow children to play with it.
• This product contains small parts. Adult assembly required. Exercise care when
unpacking and assembling the product.
WARNING
extra video camera
For use with the 36004 Glimpse
™
+
36064
NOTE: For best picture focus, place camera 6 to
8 ft. from crib.
1. Plug in nursery camera.
2. Place camera on a flat surface, such as a
dresser or shelf.
3. Or, mount the camera on a wall using the
screw and wall anchor provided.
tabletop wall mount
(If unsuccessful, repeat the above steps. Make sure the
camera and monitor are next to each other for pairing.)
Extra Cameras: To order an additional camera (item
#36064), please contact our Consumer Relations Team at:
401-671-6551 or www.summerinfant.com/contact for
details.
ADDING A CAMERA
INSTALLING THE CAMERA
EXIT MENU
GLIMPSE+
BATTERY WARNING
•
Use only the original rechargeable battery provided. Please
contact Summer Infant
(USA), Inc. for replacement battery. Contact information can be found on the back page of
these instructions or on the battery itself.
• Do not short-circuit supply terminals.
• Only the recommended battery or equivalent are to be used, volts and size.
• Remove battery when product is stored for long periods of time or when battery is
exhausted.
• Dispose of exhausted battery properly.
• Keep all batteries away from children.


