Installation Guide

Step 1:
Screw the hoses “G” with the faucet body through the thread pipe “F”
and the O-Ring “B”
Step 2:
Screw the thread pipe “F” with the body “A”
Step 3:
Through the faucet body with O-ring “B” and thread pipe “F” into the
hole of basin
Step 4:
Through the rubber gasket “C” and metal gasket “D” in the thread pipe
and Screw the nut “E” on the thread pipe
Step 5:
Connecting the end of the hoses to the connector of the cold and hot
water supply system.