Dimensions Guide
5. INSTALLATION
5.1 Turn on your shut-off valve for cleaning the hot and cold water supply pipe before connect to the faucet, allow the water
flush 3~5 minutes to flush out dirt and debris. Shut off the water supply again after done.
5.2 Attach the O-ring “B” to the bottom of faucet body “A” and position them on the center hole of mounting surface, attach the
rubber washer “F” onto spout shank “H” and fasten with shank lock nut “G” by wrench from underneath
SUMERAIN SANITARY GROUP WWW.SUMERAIN.COM