Dimensions Guide

INSTALLATION STEPS
1. BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding.SUMERAIN recommends calling a
Professional,if you are uncertain about installing this product!, this product should be installed in
accordance with all local and state plumbing and building codes.
2. SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are usually found near the water meter. if you are
replacing an existing unit, remove the old unit and clean the mounting surface thoroughly.
3. CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all the following items are included.
CODE ITEM NAME QTY CODE ITEM NAME QTY
A
Faucet Body
1PCS
B O-Ring 1PCS
C
Foam gasket
2PCS
D Knob 2PCS
E
Escutcheon
2PCS
F Rubber washer 1PCS
G
Shank Nut
1PCS
H Shank 1PCS
I
Rubber washer
1PCS
J Rubber washer 2PCS
K
Lock Nut
2PCS
L Valve body(Hot) 1PCS
M
Tee
1PCS
N G1/2” Hoses 2PCS
O
Allen wrench
1PCS
P Hot/cold sign 2PCS
Q
Valve body (Cold)
1PCS
If any of these items are missing, please contact SUMERAIN consumer service at [phone] or email to:
[e-mail]
SUMERAIN SANITARY GROUP WWW.SUMERAIN.COM