MODEL: S1337CM Version: 2.1 INSTALLATION GUIDE WIDESPREAD LED WATERFALL BASIN FAUCET SUMERAIN SANITARY GROUP WWW.SUMERAIN.
THANK YOU Dear Valued Customer, SUMERAIN would like to take this opportunity to thank you for purchasing SUMERAIN products. It is our sincere hope that you are completely satisfied with your new purchase. All SUMERAIN products are carefully engineered, and factory tested to provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated instructions.
LIMITED LIFETIME CONSUMER WARRANTY VERSION: 140320.15.3 This product has been manufactured and tested to the highest quality standards by SUMERAIN sanitary Inc("SUMERAIN").This warranty is limited to SUMERAIN products which are purchased by a consumer in the China after Jan 1,2010 and installed in China or the state which has SUMERAIN technical support department locally.(visit http://www.sumerain.com/en/supportcenter.asp for review the state list of SUMERAIN technical support department).
FUNCTIONS AND SPECIFICATION Function Bathroom Sink Faucets Feature LED, Waterfall, Widespread Style Contemporary Finish Chrome Installation Holes Three Holes Handle style Knob Number of Handles Two Faucet Total Height 150mm [5-7/8 Inch] Spout Reach 130mm [5-1/8 Inch] Spout Width 72mm [2-13/16 Inch] Spout Height 100mm [3-15/16 Inch] Max deck thickness 32mm [1-1/4 Inch] Valve Type Ceramic disc Valve Faucet Body Material Brass Faucet Spout Material Glass SPOUT Net Weight 1.
DIMENSION FRONT VIEW OF FAUCET SIDE VIEW OF FAUCET SUMERAIN SANITARY GROUP WWW.SUMERAIN.
Φ Φ Φ COMPATIBLE BASIN DIMENSION MAX DECK THICKNESS SUMERAIN SANITARY GROUP WWW.SUMERAIN.
INSTALLATION STEPS 1. BEFORE PROCEEDING WARNING: Read all the instructions completely before proceeding.SUMERAIN recommends calling a Professional,if you are uncertain about installing this product!, this product should be installed in accordance with all local and state plumbing and building codes. 2. SHUT OFF WATER SUPPLY Locate water supply inlets and shut off the water supply valves. These are usually found near the water meter.
4. INSTALLATION HOLES INSPECTION Verify that the hole sizes and positions in the wall are correct,the diameter of mounting hole recommend 32mm(1-1/4”) and maximum 35mm(1-3/8”) ,the max thickness of deck is 32mm(1-1/4”) Φ Φ SUMERAIN SANITARY GROUP Φ WWW.SUMERAIN.
5. INSTALLATION 5.1 Turn on your shut-off valve for cleaning the hot and cold water supply pipe before connect to the faucet, allow the water flush 3~5 minutes to flush out dirt and debris. Shut off the water supply again after done. 5.2 Attach the O-ring “B” to the bottom of faucet body “A” and position them on the center hole of mounting surface, attach the rubber washer “F” onto spout shank “H” and fasten with shank lock nut “G” by wrench from underneath SUMERAIN SANITARY GROUP WWW.SUMERAIN.
5.3 Disassemble hot “L” and cold water valve “Q” assembly to prepare for next step’s installation. Unscrew the inside set screw of knob ”D” anticlockwise by Allen wrench “O” and disassemble the Knob from hot and cold valve assembly . 5.4 Position hot valve body “L” onto left mounting hole, attach the rubber gasket “J” and fasten lock nut ”k” from underneath the sink, fasten the lock nut ”K” to valve body “L” by hand and fasten the set screw by the Allen wrench to attach knob onto cartridge stem.
5.5 Screw on spout tee “M” onto the spout shank “H”, please attach the rubber washer “F” into the tee for water leak proof SUMERAIN SANITARY GROUP WWW.SUMERAIN.
5.6 Connecting the flexible hoses “N” to the cold and hot water valve inlet (“L” and “Q”), the other end of the hose connects to the tee (“M”). 5.7 Screw in the hot and cold flexible hose “N” and attach them to the water supply. 6. INSPECTION 6.1 Turn on hold and cold water supply and check all connection for ensuring no leaking anywhere. INSTALL FINISH SUMERAIN SANITARY GROUP WWW.SUMERAIN.
CLEARNING RECOMMENDATION FOR SUMERAIN PRODUCTS Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning.
TROUBLESHOOTING Symptom Solution A. B. A. The water pressure is too low B. C. A. The spout sprays water all over B. Water is leaking from the faucet under the A. B. sink Faucet leaks from the handle Handle is loose LED does not illuminate A. B. C. A.