Installation Guide

Step 1:
Screw the hoses “F” with the faucet body through the thread pipe “C”
and the O-Ring “B”
Step 2:
Screw the thread pipe “C” with the body “A”
Step 3:
Through the faucet body with O-ring “B” and thread pipe “C” into the
hole of basin
Step 4:
Through the rubber gasket “D” in the thread pipe and Screw the nut “E”
on the thread pipe
Step 5:
Connecting the end of the hoses to the connector of the cold and hot
water supply system.