Installation Guide

INSTALLATION STEPS
1. BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding.SUMERAIN recommends calling a professional
if you are uncertain about installing this product!, this product should be installed in accordance with all
local and state plumbing and building codes.
2. SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are usually found near the water meter. if you are
replacing an existing unit, remove the old unit and clean the mounting surface thoroughly.
3. CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all the following items are included.
CODE ITEM NAME QTY CODE ITEM NAME QTY
SUMERAIN SANITARY GROUP WWW.SUMERAIN.COM
A
Faucet Body
1PCS
B O-Ring 1PCS
C
AA battery holder
1PCS
D shank 2PCS
E
Rubber washer
1PCS
F metal shim 1PCS
G
Nut
1PCS
H Flexible hose 2PCS
I
Fasten sheet metal
2PCS
J Screw 2PCS
If any of these items are missing, please contact SUMERAIN consumer service at [phone] or email to:
[e-mail]
sample copy