Quick set-up User Manual

2
DPB : QUICK-START GUIDE
Réf: 400 369 - 02 - GB / DIS
06/2009
3
3
1
1
SET menu
BEFORE FILLING THE MACHI N E
BEFORE FILLING THE MACHI N E
•
1
1 • CALIBRATE THE FORWARD SPEED OVER 100 M
THE BELT MUST BE ENGAGED
- Press on .
(choose tractor n°1)
- Press on .
- Position the cursor on «calibration
over 100 m» with .
- Press on .
(data confirmation)
- Once in front of the first mark press on .
- Then, follow the on-screen instructions.
- After, presson on to exit.
•
3
3 • TYPE OF FERTILISER
This allows a stored fertiliser to be selected :
- Press on then,
- Press on or to select a letter to asign to a type of fertiliser.
NOTE:
the T-factor is attributed to the selected fertiliser, it is updated each time a rate calibration
test is performed (in the Main menu).
- Select the floor belt speed (medium or slow)
- Select the reducer if low rates (yes or no).
Then, to exit, press on .
•
2
2 • SETTING THE
WORKING WIDTH
- Use the numeric keypad and
confirm with .
- Then, to exit, press on .
2
2
TI ME / DA TE
CO NT RA ST
/ BR IG HTNESS
UN IT S
LA NG UA GE
HE LP LI NE
C HO IC E OF INSTRUMENTS
IN DI CE
B15