Quick set-up Owner's manual

DPB Polyvrac and or XLT :

Quick-start guide

General presentation

Choice of menus

Numeric keypad

Factory and diagnostic

parameters

Data confirmation

Backspace

On/off switch

Î There is a choice of 3 menus - setting menu (SET)

- spreading menu (MAIN)

- information menu (INFO)

Î Fit the power cables

Supply for the Vision control box → Cobo plug inside the tractor cab

Supply for the actuators (the big cable ) → Direct from the 12 Volt battery

Î When setting up, follow these instructions :

c Calibrate the forward speed.

d Program the working width.

e Choose a product (A, B, C…) and confirm the machine parameters

(floor belt speed, shutter rate reducer)

f Set the quantity/ha.

g Perform a rate calibration test (T factor)

Réf : 400369 GB/DIS - 01 Page 1 07/2007

PAGE 1
DPB Polyvrac and or XLT : Quick-start guide General presentation Choice of menus Numeric keypad On/off switch Backspace Factory and diagnostic parameters Data confirmation Î There is a choice of 3 menus - setting menu (SET) - spreading menu (MAIN) - information menu (INFO) Î Fit the power cables Supply for the Vision control box → Cobo plug inside the tractor cab Supply for the actuators (the big cable ) → Direct from the 12 Volt battery Î When setting up, follow these instructions : c Calibrate t
PAGE 2
DPA DPB : Quick-start guide SET menu Before filling the machine c Calibrate the forward speed over 100 m : ! The belt must be engaged - Press on (choose tractor n°1) - Press on - Position the cursor on « calibration over 100 m » with - Press on (data confirmation) - Once in front of the first mark press on - Then, follow the on-screen instructions - After, press on to exit.
PAGE 3
DPA DPB : Quick-start guide MAIN menu Shows if the hydraulic shutters are opened or closed Shows the type of fertiliser Shows the electric actuator position Enable rate modulation Press to operate the TRIBORD and select the right / left or both discs for rate modulation f Set the quantity per ha g Perform a rate calibration test - Use the numeric keypad When using the buckets : - Press on , the cursor moves to calibration test.
PAGE 4
DPA DPB : Quick-start guide Information menu Tons spread Area covered Choice of either PARTIAL or TOTAL counter for . Tons spread .