User Manual
Table Of Contents
output August 19, 2019 8:28 Page 2
GENERAL INFORMATION
Thank you for choosing the Unisense SulfiLogger
™
sensor - the
only hydrogen sulfide (H
2
S) sensor on the market enabling:
•
Direct measurement of H
2
S concentrations in either liquid
or gas phase
• Easy plug’n’play installation
•
Operation for measuring campaigns in harsh environments
such as sewer networks
• Easy cleaning, maintenance and calibration
SAFETY
Please read this manual carefully before unpacking, installing or
operating this equipment. Although the operation of the SulfiLog-
ger
™
sensor is straight forward, it is mandatory to be familiar with
the content of this manual. Failure to do so may result in serious
injury to operators or other persons, or damage to equipment. Do
not use or install the SulfiLogger
™
sensor and auxiliary equipment
in any other way than specified in this manual. Special attention
must be paid to all danger and caution statements.
Do not use the SulfiLogger
™
sensor outside the specified electri-
cal, mechanical and thermal parameters as specified in the data
sheet. During the installation please wear personal protective
equipment (PPE) according to the safety regulation of the installa-
tion site.
Hazard statement nomenclature
2