User Manual
Table Of Contents
output August 19, 2019 8:28 Page 18
SulfiLogger™
sensor
S1-1010-
5mgL
S1/X1-1020-
5mgL
S1/X1-1120-
5mgL or
1000ppm
X1-1220-
1000ppm
Environment Wastewater Wastewater
Pressurized
wastewater
or gases
Pressurized
gases
Range 0-5 mg/L 0-5 mg/L 0-5 mg/L 0-1000 ppm
Max pressure 10m 10m 3 barg 10 barg
Input power Battery 20 to 30 V 20 to 30 V 20 to 30 V
Output data Logged data
RS-232 or
4-20 mA
RS-232 or
4-20 mA
RS-232 or
4-20 mA
Mounting
Free hanging or
Wall mounted
Free hanging or
Wall mounted
In-line or
Flow cell
In-line or
Flow cell
Technical specifications common for all sensors:
Accuracy +/- 5% of full range
Response time (t90) <25 seconds
Detection limit 1% of full range
Operating humidity range 0-100%
Design temperature range -20
◦
C to +60
◦
C ( -4
◦
F to +140
◦
F)
Operating temperature range 0
◦
C to +40
◦
C ( 32
◦
F to +104
◦
F)
Mechanical specifications common for all sensors:
Length 240 mm
Diameter Ø48.3mm / 1 ½” pipe
Weight 0.85 kg
Material Stainless Steel - EN 1.4404 (316L)
Warranty 3 months
KNOWN INTERFERING SUBSTANCES
Below is a list of chemicals that has been tested against the sensor.
The table shows where interference’s has been found and to which
extend they interfere. This list is also available online:
www.sulfilogger.com/technology
18