AWJDigital Torque Wrench INSTRUCTION
Dear customers, Thank you for using SUG AWJ Digital Torque Wrench, besides this instruction, you can view the teaching videos in our Youtube channel, to learn how to use the wrench easily. If you have any other question, please contact us in Facebook, or send email to info@sugpower.com. Search “SUG TECH” in Youtube Or Scan the QR code to view our teaching videos Search “SUG.
User’s Manual for Digital Display Torque Wrench 1,Overview 1.1Main purpose and applicable range A ratchet-head digital display torque wrench and replaceable head digital display torque wrench are different from normal torque wrench, wherein the AWJC replaceable head wrench with its attached ratchet head can be replaced with an open head, a plum blossom head, a movable opening head,etc at any time.
1.4Functions and names of each component 8 1 2 3 4 7 6 9 10 1.Two-way ratchet head 2.Steering paddle 11. Torque value 3.Main body 12.P (peak mode), T (real time mode) 4.LCD screen 13. Unit (N.m、in.lb、ft.lb、kgf.cm) 5.Key 14. LED indicator 6.Buzzer 15.Menu key 7.Battery box 16.Confirm key 8.Battery cover 17.Upward key 9.Ratchet torque square head 18.Cancel key 10.Handle 19.
2,Technical specification of product Storage Model 200 100 capacity of materials Min.scale value Operating 0.1 mode Peak hold (P)/real time mode (T) Max. operating range 200N.m/147.5ft.lb/1770in.lb/2039.43kgf.cm Unit N.m、in.lb、ft.lb、kgf.cm (N.m) Connectors (inches) Type of 1/2 ratchet head Setting range of buzzer Teeth number 10-200 of ratchet Number of Length 535 Accuracy* Clockwise: ±2.5% 1 Counterclockwise:±3.
3,Use method 3.1、 Turn ON/FF by zero clearing: press C key to turn on, if the power value appears after the turn on, press C key to clear, under no operation, enter the sleeping mode for 5 minutes, press C key to start, and also press and hold C key to turn off. 3.2、Setting method of pre-set value: Under normal power-on state, shortly press M key on the measurement interface, and switch UP/DN key to obtain your required pre-set value.
4,Precautions： 4.1 In order to maintain good accuracy, it is recommended to re-calibrate one time approximately every year. 4.2、Over-torque may cause damage or loss of accuracy (more than 105% of the maximum torque range). 4.3、Do not shake the wrench vigorously or drop the wrench to the ground. 4.4、Do not use the wrench as a hammer. 4.5、Do not place the wrench in a place with high temperature, high humidity or direct sunlight. 4.6、Do not use the wrench near water. 4.
