Installation Sheet

Caution
Hinge
Main
body
14
14
31
29
9
113 113
138
146
160
1
9
25
25
8R6
HES3D-160取説 hes3d01.EPS
Frame
side
Screw
cover
Frame
side
leaf
Door
side
Screw
cover
Door
side
leaf
Base
frame
Backward / forward
adjustment screw (2)
Backward/forward
Vertical
Vertical
adjustment
screw (2)
Flat head screw hole
5.5/ 10.3
Horizontal
adjustment
screw (2)
(2)
(2)
(
14
)
INSTALLATION MANUAL
FOR HES3D-160 CONCEALED HINGE
(3-DIMENSIONAL ADJUSTABLE HINGE)
WARNINGS
Do not install hinge in exposed location; i.e., exposed to
rain or snow.
Before installing hinges in conjunction with an automatic
door closer, check that door specifications suit both the
automatic door closer and hinges.
Opening/closing with excessive force may cause
malfunction.
After completed installation, occasionally check that
screws remain fixed tightly.
COMPONENT PARTS
Read all instructions carefully for proper use.
HINGE PARTS
ITEM NO. / FINISH
DOOR SPECIFICATIONS
ADJUSTMENTS
INSTALLATION DRAWING
Round sharp edges of door and frame by applying
cuts with “C1 and over” or “R1 and over.” (Refer to
“
＊
” in the drawing.)
●
Bored hole drawing for
door side leafgram
●
Bored hole drawing for
frame side leaf
ITEM NO. FINISH
HES3D-160SL Silver
HES3D-160GL Gold
Recommended door dimensions (2 hinges per door):
Maximum Door Weight : 45kg (99lbs)
Minimum Door Thickness : 35mm (1-3/8˝)
Maximum Door Height : 2400mm (94˝)
Maximum Door Width : 900mm (36˝)
Vertical adjustment
±
3mm
Horizontal adjustment
＋
3mm
,−
2mm
Backward / forward
adjustment
±
1mm
・
CONCEALED HINGE 2 pcs
・
Flat Head Screw (M4.8
×
25) 8 pcs
×
2 sets
・
Hex Key (Nominal M4) 1 pc
・
Template 1 pc
・
INSTALLATION MANUAL
Maximum
4 mm
Bored hole drawing
for door side leaf
HES3D-190取説 hes3d10.EPS
115
160
9
25
29
Door
8R6
Maximum
5mm
Bored hole drawing
for frame side leaf
HES3D-190取説 hes3d11.EPS
160
115
9
25
31
Door
Frame
8R6
Maximum
5 mm
Maximum
Door
Frame
Door
Frame
Door
Door
HES3D-190取説 hes3d09.EPS
4 mm
※
※
180˚
25
25
1
3.5
31
29
Bored hole drawing
for door side leaf
Bored hole drawing
for door side leaf
Bored hole drawing
for frame side leaf
Bored hole drawing
for frame side leaf