User Manual

6
Oscillator section
Unique has two main oscillators with five generator options each.
Sawtooth
Triple Saw
Pulse
Triple FM
Noise
Both oscillators offer typical ADSR parameter:
Attack: adjust the attack time of the amplitude
envelope
Decay: the time after the attack phase until sustain
Sustain: adjust the amplitude level after the decay
Release: adjust the release time of the envelope
The Octave knob (attenuated) sets the rootnote.
The five positions allow for adding/subtracting one or two octaves.
Detune will detune the voices slightly. Usually a good way to add some analogue and
warm impression.
Sawtooth
The Sawtooth is the most basic oscillator and
contains the spectral content of all natural
sounds. The anti-aliased algorithm produces a
crystal clear sound even in high frequency ranges.
This oscillator is very efficient regarding CPU
consumption.
Triple Saw
Triple Saw uses 3 hard synced Sawtooth
oscillators to produce a very rich frequency
spectrum. Spread, a pitch offset between the 3
oscillators, results in a fatter sound. With this
oscillator you can create string- and organ
sounds, as well as sharp sync leads.