User Manual

16
Main Controls
The main controls in Unique are knobs. Just click them and drag up or down to turn
them. While moving them, a display appears showing the value and unit of the
parameter.
The knobs have different colors, which reflect certain functionalities.
White: are modulation-related parameters
Red: are midi-related parameters
Blue: are general sound design parameters
Yellow: are amplification parameters
All knobs can be modulated with internal modulators or controlled by MIDI or Host
Automation. Just right click on a parameter and a menu with certain modulation sources
comes up. The first 5 entries assign a modulator to the knob you just clicked on.
The entry ‘
MIDI LEARN’ puts the knob into MIDI learn mode. Then the next MIDI-CC
message you send to Unique will control this knob.
To clear any assignment, just hit the entry ‘CLEAR’.
Note:
If you assigned a knob to a modulator or to a MIDI-CC you should not use Host
Automation for this knob. Otherwise the parameter will receive multiple values at the
same time, which might cause unpredictable behaviors.
BACK
TO TABLE OF CONTENT