Manualshelf

User's Manual

ManualsBrandsSuga Electronics ManualsElectronics802.11 b/g/n WLAN USB Module
12345678910
Suga Electronics Limited
Page 8 of 19
7. A new icon will appear at the lower-right corner of your computer after driver
installation. If you put the mouse cursor on top of the icon, a pop up message box
will indicate to you that the WLAN module does not exist.
8. Please plug in the SWN21MB WLAN module into your embedded system for the
hardware installation.
Hardware Installation
1. Connect one end of the USB cable to the Adapter
2. Connect the other end of the USB cable to the USB port on your computer
Because the Adapter gets its power from the host, there is no external power supply.