User's Manual

Suga Electronics Limited
Page 14 of 19
process of authentication will appear. This function is helpful to find out the
problem when you can not be authenticated, and you can provide this
information to authentication server’s administrator for debugging purpose.
 Enable CCX – Enable Cisco Compatible eXtensions CCX is a wireless
feature developed by Cisco used to improve the wireless performance with
CCX compatible wireless devices.
 Enable Radio Measurement – When you’re connecting to CCX-compatible
access point, check this box to enable radio measurement function to improve
wireless connectivity
 Non-Serving Channel Measurements Limit – When you’re connecting to
CCX-compatible access point, check this box to enable measurement on
unused radio channels to improve wireless connectivity. Limit the time used
for said measurement to certain time. Default value is 250.
6. Open the tab Statistic as the Figure 3-5 Statistic of transmit and receive, you can
click Reset Counter to reset the statistics of all items back to 0. Click OK to
close the window.
 Transmit – To appear the Statistic of the frames transmitted successfully,
frames retransmitted successfully, frames fail to receive ACK after all retries
RTS frames successfully receive CTS and RTS frames fail to receive CTS.
 Receive – To display the statistic of frames received successfully, frames
received with CRC error, frames dropped due to out-of-resource and
duplicate frames received.
 Reset Counter – Reset the statistic of all items.
7. The function of WMM, WPS and Radio On/Off are;
WMM -> Display the WMM setup status
WPS -> WPS functional and parameter setting parameter.