Use and Care Manual

Step 1: Place part #J1/C/J on the bottom frame

(A6/A4), using 7 screws 1# and gaskets to ﬁx.

Step 2: Use 2 screws 9# and gaskets to install 2

part#（H5+H6）with part#C & J1, then put on the

plastic caps as shown in ①.

Step 3: Use 2 screws 9# and gaskets to install 2 part#（H5+H6）with part#J1 & C, then put on

the plastic caps as shown in ③.

Step 4: Use 4 screws 9# and gaskets to install 2 part#（H5+H6）with 2 part#J, then put on the

plastic caps as shown in ⑤.

Repeat the above procedures to assemble the another side as shown in ②④⑤.

Step 5: Use 2 screws 9# and gaskets to installe 2

part#（H4+H3）with part#C & J, then put on the

plastic caps as shown in ③.

Step 6: Use 2 screws 9# and gaskets to installe

2 part#（H4+H3）with part#J & C, then put on the

plastic caps as shown in ④.