, USER S MANUAL DINING TABLE SET 8 SEATER A0013-GRBL
Contact Us! Need Help! Do NOT return this item. Contact our friendly customer service department for help first. Before You Start Please do not exceed the weight limitation of each items Do not stand on or use any part of this item as step ladder Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included.
4 B C D A E 5 G H H F G F I I F Notice: 1. 50% Tighten before xing all screws, Allen wrench is recommended instead of an electric drill. 2. Place the item on a at ground to adjust and make sure it remains stable. 3. Tighten up all screws with tools gradually. 4. If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process. 5.
Part List & Hardware A B Right frame (8 pcs) D C Leftframe (8 pcs) E Seat frame (8 pcs) G F Front frame (8 pcs) Short table top frame (2 pcs) Long table top frame (2 pcs) 2 Bolt M6x45mm (44 pcs) 4 Middle table top frame (2 pcs) 3 Bolt M6x30mm (48 pcs) 5 Chair cushion (8 pcs) Table leg (4 pcs) I H 1 Back frame (8 pcs) Bolt M6x15mm (12 pcs) 6 Table glass (3 pcs) 4 Allen key (1 pc)
Chair assemble STEP 1 Connect Seat frame (D) & Front frame (E) with Bolt (2) x8 E 2 D 2 80% STEP 2 Connect part from STEP 1 & Right frame (A) with Bolt (1) & (2) x8 1 2 1 A 80% 5
Chair assemble STEP 3 Connect part from STEP 2 & Left frame (B) with Bolt (1) & (2) x8 1 1 2 B 80% STEP 4 Connect part from STEP 3 & Back frame (C) C x8 80% 6
Chair assemble STEP 5 Connect part from STEP 4 with Bolt (1) & (2) x8 1 2 2 80% STEP 6 Put on Chair cushion (4) to complete chair x8 4 100% 7
Table assemble STEP 7 Connect Long table top frame (H), 2 pcs Short table top frame (G) & 2 pcs Middle table top frame (I) with Bolt (1) & (3) x1 G I H 3 1 I 3 G 3 1 80% STEP 8 Connect part from STEP 7 & Long table top frame (H) with Bolt (1) & (3) x1 1 3 H 3 3 1 80% 8
STEP 9 Connect part from STEP 8 & 4 pcs Table leg (F) F F x1 F F F 100% STEP 10 Connect part from STEP 9 with Bolt (3) 3 3 x1 100% 9
STEP 11 Put on Table glass (5) to complete table x1 5 5 100% 5 10
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing. Check bolts/screws periodically and tighten them if necessary.
