Use and Care Manual

Assembly Instructions
Step 8
Step 9
first assemble
8
Note: Assemble 2pcs screw M6x25(b) in 2pcs legs(9) first, then assemble other 2pcs screws.
Align the hole of the base(11) to the rivet of the door panel(8) and assemble 4 pcs screw M6x25(b).
Adjust 4pcs M6X12 screws assembled leg(9) and leg(12) to the table(2) first.
Make sure igniter and valve pole in the middle of the hole,then fasten all screws in Step 2,3,4,5,8,9.
9
12
10
Page 13 of 23